Light + Building 2024 in Frankfurt: Intelligence in electrical safety

Visit us at the Light + Building trade fair in Frankfurt - the trade fair for electrification and digitalization of home and building technology as well as networked security technology!

The trade fair takes place from the 3rd to 8th of March 2024. We shall be glad to welcome you at our stand in hall 11 at stand C40 !   


light + building 2024

Which topics and products will you find at our stand?

Our motto for the trade fair is “Intelligence in Electrical Safety” as we provide smart solutions for electrical safety in industrial applications. 

In a face-to-face conversation at our stand you can find out which solutions we offer and which actions you can take to overcome the challenges you are facing. Close to practical application. Future-oriented. There for you.

These are our topics and products for this fair:  

Light and Building 2024 Bender electrical safety solutions

Continuous residual current monitoring for the periodic verification in accordance with IEC 60364-6

With the LINETRAXX® SmartDetect RCMS410, Bender offers a residual current monitor for earthed systems. In accordance with DIN EN 62020-1 the most advanced instrumentation is installed, with four channels in a compact housing. The device is easy to install and commission. In addition, operation is facilitated even more as parameters can be set via the Bender Connect App. The LINETRAXX® SmartDetect RCMS410 is suited for nearly every electrical installation.

Find out more! 
residual current monitoring solution in accordance with IEC 60364-6

Intelligent instrumentation in an extremely confined space

The LINETRAXX® Geräte SensorPRO devices connect the best high-resolution instrumentation via open communication in a very confined space. They offer new functions and are suitable for manufacturing applications, building automation and data centres, to name but a few.


For more information 
measuring current transformers Light and Building 2024


Human maschine interface

The CP9...-I Control Panel serves to give an optical and an acoustic alarm and to translate information from the system into understandable instructions for operation and action. This applies especially when critical operating situations are likely to occur.


Find out more! 
control centre for condition monitoring systems Light and Building 2024

Monitoring and automated reporting

With POWERSCOUT® you know what happens in your installation at any time, as all measured values can be stored automatically and continuously. The web-based software solution helps you to recognise disturbances early on and to eliminate their causes in an economically efficient manner.


Find out more

Bender Technology Included

Well-positioned for future challenges of electromobility. With "Bender Technology Included", you get future security, simplicity, manufacturer independence and electrical safety from a single source.

Compatibility and interoperability
    • Our technology supports ISO15118 and other standards to ensure that the charging stations work seamlessly with different vehicles and systems. 

Dynamic load management

    • "Bender Technology Included" enables intelligent load management that efficiently distributes the available energy and ensures that charging points are not overloaded. 

Flexible growth

    • Thanks to the update capability of Bender Technology, new functions and standards can be easily integrated. 


Easy integration 
    • Bender products can be integrated regardless of manufacturer and can be seamlessly integrated into various charging infrastructure ecosystems.


Bender_Technology_Included_20201103_Grey (1)

Our product variety

Our wide range of electrical safety relay solutions has been specially developed for electric vehicle charging stations. Our components are designed so that they can be seamlessly integrated into the electronic control systems of safety devices for electric vehicles (EVSE).

BU-E Produkte light+building









You can find many more products and information on our website.

Find out more
Vier Personen in einem OP-Saal während einer Operation

Reliable power supply for hospitals


Standard-compliant solutions for hospitals, clinics and medical care centres. Whether as a complete solution or individual device, you will receive state-of-the-art equipment of the highest quality that fulfils the highest requirements in practice.



Standardised medical IT system

Our solutions comply with DIN VDE 0100-710 or HD 60364-7-710, ensuring safe and reliable operation in areas used for medical purposes.



Remote alarm indicator and operator panel for every application 

Whether intensive care unit, emergency room or operating theatre: Our control panels are suitable for a wide range of applications in medical areas. They signal faults reliably, both visually and acoustically, and are available in various sizes and with different functionalities.

Find out more about our products. 

You can find many more products and information on our website.

Find out more

Your contacts at the fair

We shall gladly discuss the varied topics, products, and solutions by Bender with you in person at the trade fair or before then. Our designated contacts will be happy to assist you! 
At our press centre more information about the current developments by Bender awaits you. 
Your are from the media and would like to receive our current press releases regularly? Send us an E-mail to – We shall contact you!



Responsible for our presence at the fair 

Marco Giegerich
Marco Giegerich

Director Region Management EMEA

Tel: +49 6401 807-897


Marc Euker
Marc Euker

Regional Manager EMEA

Tel: +49 6401 807-367


Michael Miowitz
Michael Miowitz

Regional Manager

Tel: +49 175 2600 346



One more step to your free trade fair ticket at the Light + Building

We would like to invite you to visit us at the Light & Building trade show in Frankfurt at our booth.
Fill out the form to express your interest in a free trade fair ticket. You will receive an e-mail with your personalized ticket code shortly